Initial Display Languages Of Sms; When Accessing By Sms Installer Service (Password Authentication) - Canon imageRUNNER ADVANCE 8105 Series Service Manual

Hide thumbs Also See for imageRUNNER ADVANCE 8105 Series:
Table of Contents

Advertisement

2
Technology > MEAP > Login to SMS > Initial Display Languages of SMS
MEMO:
SMS Access can be gained also from Remote UI.
Access Remote UI and click on SMS shortcut shown on the lower left of the screen to
gain access to SMS.
When only the password authentication is enabled, the password authentication
screen is shown.
When only the RLS authentication is enabled, no further authentication is needed
to access SMS. This is because users have already authorized upon accessing to
Remote UI.
2
Technology > MEAP > Login to SMS > Initial Display Languages of SMS

Initial Display Languages of SMS

SMS supports English and Japanese. Display language can be changed with selecting by the
drop down list on a login page.
The initial display language at the time of accessing SMS depends on the setting.
In former SMS, the language setting of "initial setting/registration (user mode)" was used.
However, when the language setting is other than English or Japanese, it displays in English.
After changed, it will be as follows.
Refer to the setting of the
Accept-Language header,
which a browser sends out.
Refer to the setting of a language
displaying in registration/initial
setting [Additional Function].

When accessing by SMS Installer Service (Password Authentication)

It is referred in order of the language priority (setting of the Accept-Language header which a
browser sends out) and the display-language setting in the "user mode". When the language
F-2-222
F-2-222
setup is other than English or Japanese, it is displayed in English.
When accessing by SMS Installer Service (Remote Login Service
Authentication).
Initial display language is set by the language setting (value of portalLang storing in Cookie)
selected by the remote UI screen. When the setting is other than English or Japanese,
Selection of display language is performed in a similar way with the SMS Installer Service
(Password Authentication) mentioned above.
Start
Refer to the value of
Yes
portalLang stored in
Logged in by RLS
authentication.
No
Remote UI display
setup language
Except English or Japanese
English or Japanese
Language
priority setting of a
browser
Except English or Japanese
English or Japanese
Display setting
of a device
Except English or Japanese
Display in English.
language configured.
2-175
Cookie.
English or Japanese
Display in the
F-2-223
F-2-223
2-175

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents