Display Ip Socket - 3Com 7750 Series Command Reference Manual

3Com Switch 7750 Series
Command Reference Guide — IP / IPX
Table 2-3 Description on the fields of the display icmp statistics command
bad formats
bad checksum
echo
destination unreachable
source quench
redirects
echo reply
parameter problem
timestamp
information request
mask requests
mask replies
information reply
time exceeded

2.1.3 display ip socket

Syntax
display ip socket [ socktype sock-type ] [ task-id socket-id ]
View
Any view
Parameter
sock-type: Type of a socket, ranging from 1 to 3. These values correspond to
SOCK_STREAM (TCP socket), SOCK_DGRAM (UDP socket or socket based on the
link layer), and SOCK_RAW (RAW IP socket).
task-id: ID of a task, with the value ranging from 1 to 100.
socket-id: ID of a socket, with the value ranging from 0 to 3072.
timestamp 0
mask requests 0
time exceeded 0
Field
Chapter 2 IP Performance Configuration
information reply
mask replies
Description
Number of input packets in bad formats
Number of input packets with bad checksum
Number of input/output echo request packets
Number of input/output packets with unreachable
destination
Number of input/output source quench packets
Number of input/output redirected packets
Number of input/output echo reply packets
Number of input/output packets with parameter
problem
Number of input/output timestamp packets
Number of input information request packets
Number of input/output mask request packets
Number of input/output mask reply packets
Number of output information reply packets
Number of time exceeded packets
2-4
Commands
0
0