Display Pim Rp-Info - 3Com 5500-EI PWR Reference Manual

(196.0.0.3, 228.0.0.0)
Protocol 0x20: PIMSM, Flag 0x4: SPT
Uptime: 00:10:49, Timeout in 196 sec
Upstream interface: Vlan-interface196, RPF neighbor: NULL
Downstream interface list:
Vlan-interface401, Protocol 0x100: SPT, timeout in 197 sec
Matched 1 (S,G) entry, 1 (*,G) entry, 0 (*,*,RP) entry
Table 3-4 display pim routing-table command output description
Total 1 (*, G) entry; 1 (S, G) entry,0 (*,*,RP) entry
(*, 228.0.0.0)
RP
Protocol
Flag
Uptime
Timeout in 197 sec
Upstream interface
Upstream neighbor
RPT neighbor
Downstream interface list

display pim rp-info

Syntax
display pim rp-info [ group-address ]
Field
3-8
Description
Total number of (S, G), (*, G) and (*, *, RP)
entries in the PIM routing table
A (*, G) entry in the PIM routing table
Rendezvous point
PIM mode (PIM-SM or PIM-DM)
Flag of (S, G) or (*, G) entry in the PIM routing
table:
SPT: The (S, G) entry is on the SPT.
RPT: The (S, G) or (*, G) entry is on the RPT.
WC: Indicates the (*, G) entry.
LOC: The switch is connected with the
multicast source directly.
Time when the entry exists
The table entry will expire in 197 seconds.
Incoming interface
Upstream neighbor
For the (*, G) entry, when this switch is an
RP, RPF neighbor field of the (*, G) entry is
Null.
For the (S, G) entry, when this switch is
directly connected with the source, is an RP,
RPF neighbor field of the (S, G) entry is Null.
List of downstream interfaces