Lec Operations; Display Lec Connection Info; Inf: Clients Info - 3Com CoreBuilder 9000 User Manual

LEC Operations

Display LEC
Connection Info
You can configure the LEC operations as follows:

Display LEC Connection Info

Display LEC Address Info
Display LAN emulation clients (LEC) connection information for a
specified ELAN and specified LEC.
A LEC is specified by its ID. To determine the ID of a specific LEC, first
perform this command with a value of 0 for LEC ID (as in the example).
All LEC IDs are displayed. Select the ID of the LEC for which you want
information and perform the command again with the desired LEC ID.
Command Actions
Enter menu sequence:
Enter a parameter at the prompt
Parameter
ELAN ID
LEC ID
Direct access sequence:
Command Result
System action taken:
System message display:
(2) LEM: LAN Emulation
(2) LES: LE Services
(3) ELN: ELANs Info

(2) INF: Clients Info

Format or Range
1–16
For more information, see "Display ELAN Parameters in
LES Database" on page 278.
0- For all
2 2 3 2 [parameters]
The LEC connection information for the specified ELAN
and LEC ID is displayed.
Information is displayed as shown in the example.
LEC Operations 295