Measuring Multiple Items Simultaneously (Multi-Task) - Omron ZS-HL User Manual

Section3

Measuring Multiple Items Simultaneously (Multi-Task)

Measuring Multiple Items Simultaneously (Multi-Task)
If you use the multi-task function, you can measure the height and surface fluctuation
simultaneously. The following describes the procedure for setting "height" for TASK1 and
"surface fluctuation" for TASK2.
1.
Set the mode switch to FUN.
2.
Select [ON] in [SYSTEM]-[MULTI-
TASK].
The
displayed. Select [OK].
Setting height (TASK1)
3.
Press the MENU key to display the
TOP menu.
4.
Press the ESC key to display the
TASK switching menu, and select
[TASK1].
5.
Select [AVERAGE] in [MEASURE]-
[TASKSET].
ZS-HL
3-8
User's Manual
confirmation message
Surface fluctuation (TASK2)
Height (TASK1)
FUN RUN
TEACH
1 OFF
is
1 SENSING
3 FILTER
1 TASK1
3 TASK3
1 OFF
3 PEAK
2 ON
2 MEASURE
2 TAS K2
4 TASK4
2 AVERAGE