Starting And Ending Sampling Before And After The Trigger Condition Is Met - Omron ZW-C1*AT User Manual

Starting and ending sampling before and after the trigger condition is met

You can adjust how long to start or end the sampling before or after the condition for starting and ending
sampling is met.
Measurement data satisfied the start condition trigger
Sampling start position A
• Sampling start position A
To start sampling before the time when the trigger start condition is met, input a negative value for the delay
time.
• Sampling start position B
To end sampling after the time when the trigger end condition is met, input a positive value for the delay time.
1
Input the delay time.
Item
Trigger condition Delay time
124
Displaying measured values in graphs
Sampling start position B
Setting item Range
-999.999999 to
999.999999 ms
Measurement value
Sampling interval
Description
The sampling starts or ends at the time shifted by the set
time from when the trigger condition is met.
ZW User's Manual