D-Link DXS-3600 Series Cli Reference Manual page 84

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
Switch# show ip http server
ip http server state :
Switch#
5-18 show ip http secure-server
This command is used to display information about the SSL feature's status.
show ip http secure-server
Parameters
None.
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
This command is used to display information about the SSL feature's status.
Example
This example shows how to display information about the SSL feature's status.
Switch# show ip http secure-server
ip http secure-server state :
Switch#
5-19 show users
This command is used to display information about the active lines on the switch.
show users
Parameters
None.
Default
None.
Command Mode
enable
disable
79