D-Link DXS-3600 Series Cli Reference Manual page 105

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
This command is used to enable AAA for the authentication or accounting function. Use the no form of
the command to disable the AAA function.
aaa new-model
no aaa new-model
Parameters
None.
Default
By default, this feature is disabled.
Command Mode
Global Configuration Mode.
Command Default Level
Level: 15.
Usage Guideline
The user should use the aaa new-model command to enable AAA before the authentication and
accounting via the AAA method lists take effect. If AAA is disabled, the login user will be authenticated via
the local user account table created by the username command. The enable password will be
authenticated via the local table which is defined via the enable password command.
Example
This example shows how to enable the AAA function.
Switch#configure terminal
Switch(config)# aaa new-model
Switch(config)#
7-13 accounting commands
This command is used to configure the method list used for command accounting via a specific line. Use
the no form of the command to disable do accounting command.
accounting commands LEVEL {default | METHOD-LIST}
no accounting commands LEVEL
Parameters
LEVEL
default
METHOD-LIST
Default
By default, this option is disabled.
Command Mode
Specifies to do accounting for all configure commands at the specified
privilege level. Valid privilege level entries are 1 to 15.
Specifies to do accounting based on the default method list.
Specifies the name of the method list to use.
100