D-Link DXS-3600 Series Cli Reference Manual page 175

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
soft
Default
None.
Command Mode
Privileged EXEC Mode.
Command Default Level
Level: 12.
Usage Guideline
This command is used to initiate a hard reset or a soft reset for external BGP sessions.
Example
This example shows how to initiate a soft reconfiguration configured for all inbound eBGP peering
sessions.
Switch# clear ip bgp external soft in
Switch#
11-27 clear ip bgp flap-statistics
This command is used to clear BGP route dampening flap statistics.
clear ip bgp [ipv4 unicast | vpnv4 vrf VRF-NAME] flap-statistics [IP-ADDRESS [/MASK-LENGTH]]
Parameters
ipv4
unicast
vrf VRF-NAME
vpnv4
MASK-LENGTH
Default
None.
Command Mode
Privileged EXEC Mode.
Command Default Level
Level: 12.
Usage Guideline
This command is used to clear the accumulated penalties for routes that have been received on a router
which has BGP dampening enabled. If no arguments or keywords are specified, flap statistics of IPv4
unicast address family prefixes are cleared.
Example
This example shows how to clear flap statistics for all IPv4 unicast address prefixes.
(Optional) Specifies to issue a soft reset without tearing down the
session.
Specifies to clear an IPv4 address family routing entry.
Specifies to clear a unicast address family routing entry.
Specifies the VRF address family routing entry.
Specifies the IPv4 VPN address family routing entry.
(Optional) Specifies the mask length for the IP address.
170