IGMP Snooping Rate Limit Settings
This table allows the user to configure the rate of IGMP snooping control packets that are allowed per port or VLAN.
To view this window, click L2 Features > L2 Multicast Control > IGMP Snooping > IGMP Snooping Rate Limit
Settings, as shown below:
The following parameters can be configured:
Parameter
Description
Port List
Specifies a port or range of ports that will be configured.
VLAN List
Specifies a VLAN or range of VLANs that will be configured.
Rate Limit (1-1000)
Configures the rate of IGMP control packets that are allowed per port or VLAN.
Click Apply to implement changes made.
DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet User Manual
Figure 4- 45 IGMP Snooping Router Port Settings window
Figure 4- 46 IGMP Snooping Rate Limit Settings window
105