Advertisement
11.3
Interface to Bus Master
11.3.1
16-Bit Registers
TCNT and TGR are 16-bit registers. As the data bus to the bus master is 16 bits wide, these
registers can be read and written to in 16-bit units.
These registers cannot be read or written to in 8-bit units; 16-bit access must always be used.
An example of 16-bit register access operation is shown in figure 11-2.
Internal data bus
H
Bus
L
master
Figure 11-2 16-Bit Register Access Operation [Bus Master ↔ TCNT (16 Bits)]
11.3.2
8-Bit Registers
Registers other than TCNT and TGR are 8-bit. As the data bus to the CPU is 16 bits wide, these
registers can be read and written to in 16-bit units. They can also be read and written to in 8-bit
units.
444
Bus interface
TCNTH
TCNTL
Module
data bus
Advertisement
