Show Radius Server Group - Allied Telesis AT-x930-28GTX Command Reference Manual

AAA C
OMMANDS

SHOW RADIUS SERVER GROUP

show radius server group
Overview Use this command to show the RADIUS server group configuration.
show radius server group [<group-name>]
Syntax
Default Command name is set to something by default.
Mode Privileged Exec
Usage Use this command with the <group-name> parameter to display information for a
specific RADIUS server group, or without the parameter to display information for
all RADIUS server groups.
Example To display information for all RADIUS server groups, use the command:
awplus#
To display a information for a RADIUS server group named 'rad_group_list1', use
the command:
awplus#
Output Figure 44-4: Example output from show radius server group
C613-50100-01 REV C
Parameter Description
<group-name>
RADIUS server group name.
show radius server group
show radius server group rad_group_list1
awplus#show radius server group
RADIUS Group Configuration
Group Name : radius?
Server Host/
IP Address
------------------------------------------
192.168.1.101
192.168.1.102

Group Name : rad_group_list1
Server Host/
IP Address
------------------------------------------
192.168.1.101

Group Name : rad_group_list2
Server Host/
IP Address
------------------------------------------
192.168.1.102
Command Reference for x930 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
Auth Acct Auth
Port Port Status
1812 1813 Active
1812 1813 Active
Auth Acct Auth
Port Port Status
1812 1813 Active
Auth Acct Auth
Port Port Status
1812 1813 Active
Acct
Status
Active
Active
Acct
Status
Active
Acct
Status
Active
2248