Show Fips Status; Show Ip Ssh - Dell S4810 Reference Manual

show fips status

Displays the status of the FIPS mode.
S4810
Syntax
show fips status
Defaults None
Command EXEC
Modes
Example
Dell #show fips status
FIPS Mode: Enabled
Dell#
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.1(0.0)
Version
8.3.19.0
Version
8.3.12.0

show ip ssh

Display information about established SSH sessions
S4810
Syntax
show ip ssh
Defaults none
Command EXEC
Modes
EXEC Privilege
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.1(0.0)
654
Introduced on the Z9000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
FIPS Cryptography