Configuring Radius Authentication/Authorization Servers - Huawei Quidway S3900 Series Operation Manual

Operation Manual – AAA & RADIUS & HWTACACS & EAD
Quidway S3900 Series Ethernet Switches-Release 1510
Enable UDP port for AAA
RADIUS client
Caution:
A RADIUS scheme can be referenced by multiple ISP domains simultaneously.

1.4.2 Configuring RADIUS Authentication/Authorization Servers

Table 1-13 Configure RADIUS authentication/authorization server
Enter system view
Create a RADIUS scheme
and enter its view
Set the IP address and port
number
RADIUS
authentication/authorization
server
Set the IP address and port
number of the secondary
RADIUS
authentication/authorization
server
Operation
radius client enable
Operation
of the primary
Huawei Technologies Proprietary
Chapter 1 AAA & RADIUS & HWTACACS
Command
Optional
By default, UDP port for AAA
RADIUS client is enabled.
Command
system-view —
Required
radius scheme
By
radius-scheme-na
scheme named "system" has
me
already been created in the
system.
Required
primary
By default, the IP address and
authentication
UDP port number of the
ip-address
primary server are 0.0.0.0
[ port-number ]
and 1812 respectively.
Optional
secondary
By default, the IP address and
authentication
UDP port number of the
ip-address
secondary server are 0.0.0.0
[ port-number ]
and 1812 respectively.
1-24
Configuration
Description
Description
default, a RADIUS