Timer Response-Timeout - Huawei Quidway S8500 Series Command Manual

Command Manual – Security
Quidway S8500 Series Routing Switches
The value of minute is related to the performance of NAS and RADIUS server. The
smaller the value is, the higher the requirement for NAS and RADIUS server is. When
there are a large amount of users (more than 1000, inclusive), we suggest a larger
value. The following table recommends the ratio of minute value to number of users.
Table 2-3 Recommended ratio of minute to number of users
Number of users
1 to 99
100 to 499
500 to 999
≥1000
Related command: retry realtime-accounting , radius scheme.
Example
# Set the real-time accounting interval of RADIUS scheme, "huawei", to 15 minutes.
[Quidway-radius-huawei] timer realtime-accounting 15

2.2.28 timer response-timeout

Syntax
timer response-timeout seconds
undo timer response-timeout
View
RADIUS scheme view
Parameter
seconds: The value range is 1 to 10 in seconds. The default response timeout value of
the RADIUS server is 3 seconds.
Description
Use the timer response-timeout command to set the response-timeout value of
RADIUS server.
Use the undo timer response-timeout command to restore the default configuration.
Related command: display radius.
Example
# Set the response timeout value of the RADIUS server to 5 seconds.
Chapter 2 AAA and RADIUS/HWTACACS Protocol
Real-time accounting interval (in minutes)
3
6
12
≥15
Huawei Technologies Proprietary
2-47
Configuration Commands