Display Ip Routing-Table Acl - Huawei Quidway S3900 series Command Manual

Command Manual - Management VLAN
Quidway S3900 Series Ethernet Switches-Release 1510
Parameter
None
Description
Use the display ip routing-table command to display the summary information about
the routing table.
This command displays the summary information about a routing table, with the items
of a routing entry contained in one line. The information displayed includes destination
IP address/mask length, protocol, preference, cost, next hop and outbound interface.
The display ip routing-table command only displays the routes currently in use, that is,
the optimal routes.
Example
# Display the summary information about the routing table.
<Quidway> display ip routing-table
Routing Table: public net
Destination/Mask
1.1.1.0/24
1.1.1.1/32
127.0.0.0/8
127.0.0.1/32
Table 1-4 Description on the fields of the display ip routing-table command
Field
Destination/Mask
Protocol
Pre
Cost
Nexthop
Interface

1.1.6 display ip routing-table acl

Syntax
display ip routing-table acl acl-number [ verbose ]
Protocol Pre Cost
DIRECT 0 0
DIRECT 0 0
DIRECT 0 0
DIRECT 0 0
Destination IP address/mask length
Routing protocol that discovers the route
Route preference
Route cost
Next hop IP address of the route
Outbound interface, through which packets destined for the
destination network segment are to be transmitted
Huawei Technologies Proprietary
1-6
Chapter 1 Management VLAN Configuration
Nexthop Interface
1.1.1.1 Vlan-interface1
127.0.0.1 InLoopBack0
127.0.0.1 InLoopBack0
127.0.0.1 InLoopBack0
Description
Commands