Display Interface Vlan-Interface - Huawei Quidway S3900 series Command Manual

Command Manual - Management VLAN
Quidway S3900 Series Ethernet Switches-Release 1510

1.1.2 display interface Vlan-interface

Syntax
display interface Vlan-interface [ vlan-id ]
View
Any view
Parameter
vlan-id: ID of the management VLAN interface the information about which is to be
displayed.
Description
Use the display interface Vlan-interface command to display the information about
the management VLAN interface, including the physical and link status, the format of
the sent frames, the MAC address, IP address (and subnet mask), description string
and MTU (maximum transmit unit) of the management VLAN.
Related command: interface Vlan-interface.
Example
# Display the information about the management VLAN interface. (Assume that VLAN
1 is the management VLAN.)
<Quidway> display interface Vlan-interface 1
Vlan-interface1 current state : DOWN
Line protocol current state : DOWN
IP Sending
00e0-fc07-4101
Internet Address is 192.168.0.39/24 Primary
Description : HUAWEI, Quidway Series, Vlan-interface1 Interface
The Maximum Transmit Unit is 1500
Table 1-1 Description on the fields of the display interface Vlan-interface command
Vlan-interface current state
Line protocol current state
IP Sending Frames' Format
Hardware address
Internet Address Primary
Description
Frames' Format is
Field
Huawei Technologies Proprietary
1-2
Chapter 1 Management VLAN Configuration
PKTFMT_ETHNT_2, Hardware
Description
Current state of Vlan-interface1
Current state of the line protocol
Format of the frames that IP sends
MAC address corresponding to the
management VLAN interface
Primary IP address
VLAN interface description
Commands
address is