Esp Off (Electronic Stability Program) Switch And Esp System - SSANGYONG 2010 Kyron User Manual

ESP (ELECTRONIC STABILITY PROGRAM) SWITCH AND ESP SYSTEM*
OFF
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
4-16
INTERIOR SWITCHES
ESP Switch
OFF
If you press the ESP switch,
OFF
the ESP function stops and
the indicator lamp in the in-
strument cluster comes on.
Press this switch again to re-
sume the ESP function. At this
time, the indicator lamp goes
out.
ESP Warning Lamp
Blinking: When ESP is activated.
On: When ESP is deactivated (by pressing the ESP
switch).
When ESP system is defective.
When ESP is activated, the indicator light is blinking and
a warning buzzer sounds. If this indicator illuminates in
spite of an activated ESP, this means a malfunction of
the ESP system.
Stopping ESP Function With ESP
If the driving wheels are slipping on snowy or icy roads,
the engine rpm may not increase even when you depress
the accelerator pedal, and accordingly, you may not be
able to move your vehicle. In this case, stop the ESP
function by pressing the ESP
switch is pressed, the ESP function stops and the vehicle
is driven independently from the sensor outputs.
Resuming ESP Function With ESP
If you push the ESP switch again when the ESP function
OFF
is deactivated (the ESP warning lamp is turned on), the sys-
tem will be resumed and the ESP warning lamp on the in-
strument cluster goes out by resuming the ESP system.
OFF
Switch
OFF
switch. When the ESP
OFF OFF
Switch
OFF