Table of Contents
Advertisement
Command
wlan tsm-req-profile
Modified Commands
The following commands were modified in ArubaOS 6.2.
Command
aaa authentication mgmt
aaa authentication via connection-profile
aaa authentication-server radius
aaa authentication-server tacacs
copy
firewall
firewall cp
interface vlan ipv6 address
ip mobile proxy
mgmt-user
provision-apsch-mode-radio-0
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Description
to define the information elements advertised by an AP with 802.11k sup-
port enabled.
This command configures a TSM Report Request Profile.
Parameter Description
The option to enable mschapv2 was added.
The following parameters were added:
allow-whitelist-traffic
l
auto-launch-supplicant
l
banner-message-reappear
l
enable-fips
l
enable-supplicant
l
whitelist
l
The following support was added:
enable-ipv6 and nas-ip6 parameters to specify an IPv6 host address
l
for the host parameter.
mac-lowercase to send MAC addresses in lowercase format.
l
IPv6 support was added for TACACS server. You can now specify an IPv6
host address for the host parameter.
The following parameters were added:
usb: partition <partition-number>
l
usb: partition <partition-number> <filename>
l
The following parameters were added:
enable-bridging
l
prevent-dhcp-exhaustion
l
The following parameters were added:
permit <ip-addr><ip-mask>
l
deny <ip-addr>
l
any
l
host
l
ftp, http, https, icmp, snmp, ssh, telnet and tftp
l
The nd parameter for configuring IPv6 neighbor discovery and IPv6 router
advertizement options was introduced.
The re-home parameter is deprecated as the re-homing functionality is
no longer available.
The rcp (Revocation Checkpoint) parameter was added. The rcp checks
the revocation status of the SSH user's client certificate before permitting
access.
sch-
If you are provisioning an 802.11n-capable AP, issue the sch-mode-radio-
|
Introduction | 5
Advertisement
Table of Contents
