Deprecated Commands - Dell PowerConnect W-7200 Series Reference Manual

Command
wlan ssid-profile

Deprecated Commands

The following commands were deprecated in ArubaOS 6.2:
Command
papi-security (deprecated)
pcap (deprecated)
policer-profile (deprecated)
firewall
local-userdb-ap add
local-userdb-ap del
local-userdb-ap modify
local-userdb-ap revoke
qos-profile (deprecated)
show papi-security (deprecated)
show policer-profile (deprecated)
show qos-profile (deprecated)
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Parameter Description
over trigger settings are now configured using the handover trigger pro-
file.
The following parameters were introduced:
dot11r-profile
l
bSec-128
l
bSec-256
l
advertise-location
l
enforce-user-vlan
l
Description
The papi-security command configure a key on the master controller
which then distributes it to other controllers and APs, thus allowing each
site to have a unique key.
Name changed to ap packet capture.
This command configures a Policer profile to manage the transmission
rate of a class of traffic based on user-defined criteria
This clears the datapath sessions when roles are updated.
This command adds a Remote AP entry to the Remote AP whitelist table.
This command deletes a Remote AP entry from the Remote AP whitelist
table.
This command modifies a Remote AP entry in the Remote AP whitelist
table.
Revoke a lost or stolen remote AP to prevent unauthorized users from
accessing the company's corporate network.
This command configures a QoS profile to assign TC/DP, DSCP, and
802.1p values to an interface or policer profile.
Shows a configured papi-security profile.
This command displays the policer profile configuration.
This command displays the QoS profile configuration.
Introduction | 7