Modified Commands In The Cli Reference Guide; Clock Summer-Time; Sntp Anycast Client Enable; Sntp Client Enable - Dell PowerConnect 5324 Release Note

Modified Commands in the CLI Reference Guide

clock summer-time

Under User Guidelines add the following:
The following steps must be completed before setting the summer clock:
3. Summer time configuration, for example: console(config)# clock summer-time recurring usa
4. Define Timezone, for example : console(config)# clock timezone 2 zone RADL
5. Set clock, for example: console# clock set 10:00:00 apr 15 2004

sntp anycast client enable

Update the command as follows:
Field Current Guide
Description The sntp anycast client enable Global
Configuration mode command enables
anycast client. To disable the polling for
SNTP broadcast client, use the no form of
this command.

sntp client enable

Update the command as follows:
Field Current Guide
♦
User Use the sntp client enable Global
Guidelines Configuration mode command to
enable broadcast clients globally.

bridge address

Update the command as follows:
Field Current Guide
Syntax bridge address mac-address {ethernet
interface | port-channel port-channel-
number} [permanent | delete-on-reset |
delete-on-timeout | secure]

bridge aging time

Update the command as follows:
Field Current Guide
Syntax seconds — Time is number of seconds.
parameter (Range: 10 - 630 seconds)
System Firmware Version 2.0.0.39
PowerConnect 5324 Release Notes
Change to:
The sntp anycast client enable Global
Configuration mode command enables anycast
client. To disable the SNTP anycast client, use
the no form of this command.
Change to:
♦
Use the sntp broadcast client enable
Global Configuration mode command to
enable broadcast clients globally.
Change to:
bridge address mac-address [permanent |
delete-on-reset | delete-on-timeout | secure]
{ethernet interface | port-channel port-channel-
number}
Change to:
seconds — Time is number of seconds. (Range:
10 - 360 seconds)
Subject to Change Without Notice Page 13