Ip Access-List Standard - Dell Force10 S4810P Reference Manual

Ftos command line reference guide for the s4810 system ftos 9.1.(0.0)
Hide thumbs Also See for Force10 S4810P:
Table of Contents

Advertisement

Usage
The order option is relevant in the context of the Policy QoS feature only. For more
Information
information, refer to the Quality of Service chapter of the
When you use the log option, the CP processor logs detail the packets that match. Depending
on how many packets match the log entry and at what rate, the CP may become busy as it has
to log these packets' details.
The monitor option is relevant in the context of flow-based monitoring only. For more
information, refer to the
The C-Series and S-Series cannot count both packets and bytes, when you enter the count
byte options, only bytes are incremented.
Related

ip access-list standard

Commands
permit
ip access-list standard
Create a standard IP access list (IP ACL) to filter based on IP address.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
ip access-list standard access-list-name
To delete an access list, use the no ip access-list standard access-list-
name command.
Parameters
access-list-name
Defaults
All IP access lists contain an implicit "deny any," that is, if no match occurs, the packet is
dropped.
Command Modes
CONFIGURATION
Command History
Version 8.3.11.1
Version 8.3.10.0
Version 8.1.1.0
Version 7.8.1.0
Version 7.6.1.0
Version 7.5.1.0
Version 7.4.1.0
Version 6.5.1.0
Port Monitoring
NOTE: When ACL logging and byte counters are configured simultaneously, byte counters
may display an incorrect value. Configure packet counters with logging instead.
– configures a standard ACL.
– configures a permit filter.
Enter a string up to 140 characters long as the ACL name.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Increased the name string to accept up to 140 characters. Prior to
7.8.1.0, names are up to 16 characters long.
Introduced on the S-Series.
Introduced on the C-Series.
Added support for the non-contiguous mask and added the
monitor option.
Expanded to include the optional QoS order priority for the ACL
entry.
FTOS Configuration Guide .
chapter.
241

Advertisement

Table of Contents
loading

Table of Contents