Enable Bios Secure Boot - Dell S5448F-ON Installation Manual

Installing ONIE on: /dev/sda
ONIE: Success: Firmware update URL: file:///lib/onie/onie-updater.tar
ONIE: Success: Firmware update version: x.xx.x.x-x
ONIE: Rebooting...
discover: ONIE embed mode detected.
Stopping: discover...start-stop-daemon: warning: killing process 897: No such process
done.
Topics:
•

Enable BIOS secure boot

• Disable BIOS secure boot
Enable BIOS secure boot
The Secure Boot configuration page in the BIOS Setup menu is password protected. If Secure Boot mode is not enabled on your
switch, use the following process to enable Secure Boot mode.
1. Enter the BIOS password. The default password is the switch service tag plus an exclamation mark; for example, xxxxxx!.
After first login, to change the default password, select the Security tab then select Administrator Password. Enter and
confirm the new Administrator password. The Administrator password range is 3 to 20 characters.
After you enter the Administrator password, you enter the Main tab of the BIOS user interface.
2. Select the Security tab using the right arrow key.
Secure boot 41