dot1x tx-period
Configure the intervals at which EAPOL PDUs the Authenticator PAE transmits.
C-Series, E-Series, S-Series, S4810
Syntax
dot1x tx-period seconds
To return to the default, use the no dot1x tx-period command.
Parameters
seconds
Defaults
30 seconds
Command Modes
INTERFACE
Command History
Version 8.3.12.0
Version 7.6.1.0
Version 7.4.1.0
show dot1x cos-mapping interface
Display the CoS priority-mapping table the RADIUS server provides and applied to authenticated supplicants on an
802.1X-enabled
C-Series, S-Series, S4810
Syntax
show dot1x cos-mapping interface interface [mac-address mac-
address]
Parameters
interface
mac-address
Defaults
none
228
Enter the interval time, in seconds, that EAPOL PDUs are transmitted.
The range is 1 to 65535. The default is 30.
Introduced on the S4810.
Introduced on the C-Series and S-Series.
Introduced on the E-Series.
Enter one of the following keywords and slot/port or number
information:
•
For a Gigabit Ethernet interface, enter the keyword
GigabitEthernet followed by the slot/port information.
•
For a Fast Ethernet interface, enter the keyword
FastEthernet followed by the slot/port information.
•
For a Ten-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port
information.
(Optional) MAC address of an 802.1X-authenticated supplicant.