Function:operation - Agilent Technologies InfiniiVision 7000A Series Programmer's Manual

:FUNCtion:OPERation

Command Syntax
:FUNCtion:OPERation <operation>
<operation> ::= {ADD | SUBTract | MULTiply | INTegrate | DIFFerentiate
The :FUNCtion:OPERation command sets the desired waveform math
operation:
• ADD — Source1 + source2.
• SUBTract — Source1 - source2.
• MULTiply — Source1 * source2.
• INTegrate — Integrate the selected waveform source.
• DIFFerentiate — Differentiate the selected waveform source.
• FFT — Fast Fourier Transform on the selected waveform source.
• SQRT — Square root on the selected waveform source.
When the operation is ADD, SUBTract, or MULTiply, the
:FUNCtion:SOURce1 and :FUNCtion:SOURce2 commands are used to select
source1 and source2. For all other operations, the :FUNCtion:SOURce1
command selects the waveform source.
Query Syntax
:FUNCtion:OPERation?
The :FUNCtion:OPERation? query returns the current operation for the
selected function.
Return Format
<operation><NL>
<operation> ::= {ADD | SUBT | MULT | INT | DIFF | FFT | SQRT}
See Also •
•
•
Agilent InfiniiVision 7000A Series Oscilloscopes Programmer's Guide
(see page 786)
| FFT | SQRT}
"Introduction to :FUNCtion Commands"
":FUNCtion:SOURce1"
":FUNCtion:SOURce2"
on page 266
on page 277
on page 278
Commands by Subsystem
5
273