Agilent Technologies InfiniiVision 7000A Series Programmer's Manual page 310

5
Commands by Subsystem
Table 69 :MEASure Commands Summary (continued)
Command
n/a
:MEASure:VAMPlitude
[<source>] (see
page 346)
:MEASure:VAVerage
[<source>] (see
page 347)
:MEASure:VBASe
[<source>] (see
page 348)
:MEASure:VMAX
[<source>] (see
page 349)
:MEASure:VMIN
[<source>] (see
page 350)
310
Query
:MEASure:TVALue?
<value>,
[<slope>]<occurrence>
[,<source>] (see
page 344)
:MEASure:VAMPlitude?
[<source>] (see
page 346)
:MEASure:VAVerage?
[<source>] (see
page 347)
:MEASure:VBASe?
[<source>] (see
page 348)
:MEASure:VMAX?
[<source>] (see
page 349)
:MEASure:VMIN?
[<source>] (see
page 350)
Agilent InfiniiVision 7000A Series Oscilloscopes Programmer's Guide
Options and Query Returns
<value> ::= voltage level that
the waveform must cross.
<slope> ::= direction of the
waveform when <value> is crossed.
<occurrence> ::= transitions
reported.
<return_value> ::= time in
seconds of specified voltage
crossing in NR3 format
<source> ::= {CHANnel<n> |
FUNCtion | MATH} for DSO models
<source> ::= {CHANnel<n> |
DIGital0,..,DIGital15 | FUNCtion
| MATH} for MSO models
<n> ::= 1-2 or 1-4 in NR1 format
<source> ::= {CHANnel<n> |
FUNCtion | MATH}
<n> ::= 1-2 or 1-4 in NR1 format
<return_value> ::= the amplitude
of the selected waveform in volts
in NR3 format
<source> ::= {CHANnel<n> |
FUNCtion | MATH}
<n> ::= 1-2 or 1-4 in NR1 format
<return_value> ::= calculated
average voltage in NR3 format
<source> ::= {CHANnel<n> |
FUNCtion | MATH}
<n> ::= 1-2 or 1-4 in NR1 format
<base_voltage> ::= voltage at the
base of the selected waveform in
NR3 format
<source> ::= {CHANnel<n> |
FUNCtion | MATH}
<n> ::= 1-2 or 1-4 in NR1 format
<return_value> ::= maximum
voltage of the selected waveform
in NR3 format
<source> ::= {CHANnel<n> |
FUNCtion | MATH}
<n> ::= 1-2 or 1-4 in NR1 format
<return_value> ::= minimum
voltage of the selected waveform
in NR3 format