Mtest:source - Agilent Technologies InfiniiVision 7000A Series Programmer's Manual

5
Commands by Subsystem

:MTESt:SOURce

Command Syntax
:MTESt:SOURce <source>
<source> ::= CHANnel<n>
<n> ::= {1 | 2 | 3 | 4} for the four channel oscilloscope models
<n> ::= {1 | 2} for the two channel oscilloscope models
The :MTESt:SOURce command selects the channel which is configured by
the commands contained in a mask file when it is loaded.
Query Syntax
:MTESt:SOURce?
The :MTESt:SOURce? query returns the channel which is configured by the
commands contained in the current mask file.
Return Format
<source><NL>
<source> ::= {CHAN<n> | NONE}
<n> ::= {1 | 2 | 3 | 4} for the four channel oscilloscope models
<n> ::= {1 | 2} for the two channel oscilloscope models
See Also
•
•
390
(see page 786)
"Introduction to :MTESt Commands"
":MTESt:AMASk:SOURce"
Agilent InfiniiVision 7000A Series Oscilloscopes Programmer's Guide
on page 360
on page 364