Waveform:yorigin - Agilent Technologies InfiniiVision 7000A Series Programmer's Manual

5
Commands by Subsystem

:WAVeform:YORigin

Query Syntax
:WAVeform:YORigin?
The :WAVeform:YORigin? query returns the y- origin value for the currently
specified source. This value is the Y- axis value of the data value specified
by the :WAVeform:YREFerence value. For this product, this is the Y- axis
value of the center of the screen.
Return Format
<value><NL>
<value> ::= y-origin in the current preamble in 32-bit
See Also
•
•
•
Example Code •
650
(see page 786)
floating point NR3 format
"Introduction to :WAVeform Commands"
":WAVeform:PREamble"
":WAVeform:YREFerence"
"Example Code" on page 634
Agilent InfiniiVision 7000A Series Oscilloscopes Programmer's Guide
on page 618
on page 633
on page 651