Trigger:m1553:Source:lower - Agilent Technologies InfiniiVision 7000A Series Programmer's Manual

5
Commands by Subsystem

:TRIGger:M1553:SOURce:LOWer

Command Syntax
:TRIGger:M1553:SOURce:LOWer <source>
<source> ::= {CHANnel<n>}
<n> ::= {2 | 4}
The :TRIGger:M1553:SOURce:LOWer command controls which signal is used
as the Lower Threshold Channel source by the serial decoder and/or
trigger when in MIL- 1553 mode.
Query Syntax
:TRIGger:M1553:SOURce:LOWer?
The :TRIGger:M1553:SOURce:LOWer? query returns the currently set Lower
Threshold Channel source.
Return Format
<source><NL>
<source> ::= {CHAN<n>}
<n> ::= {2 | 4}
See Also
•
•
•
570
(see page 786)
"Introduction to :TRIGger Commands"
":TRIGger:MODE" on page 473
":TRIGger:M1553:SOURce:UPPer"
Agilent InfiniiVision 7000A Series Oscilloscopes Programmer's Guide
on page 467
on page 571