Trigger:m1553:Pattern:data - Agilent Technologies InfiniiVision 7000A Series Programmer's Manual

5
Commands by Subsystem

:TRIGger:M1553:PATTern:DATA

Command Syntax
:TRIGger:M1553:PATTern:DATA <string>
<string> ::= "nn...n" where n ::= {0 | 1 | X}
The :TRIGger:M1553:PATTern:DATA command sets the 11 bits to trigger on
if the trigger type has been set to RTA11 (RTA + 11 Bits) using the
:TRIG:M1553:TYPE command.
Query Syntax
:TRIGger:M1553:PATTern:DATA?
The :TRIGger:M1553:PATTern:DATA? query returns the current 11- bit
setting.
Return Format
<string><NL>
<string> ::= "nn...n" where n ::= {0 | 1 | X}
See Also
•
•
568
(see page 786)
"Introduction to :TRIGger Commands"
":TRIGger:M1553:TYPE"
Agilent InfiniiVision 7000A Series Oscilloscopes Programmer's Guide
on page 467
on page 572