Root (:) Commands - Agilent Technologies InfiniiVision 7000A Series Programmer's Manual

Root (:) Commands

Control many of the basic functions of the oscilloscope and reside at the
root level of the command tree. See
on page 141.
Table 45 Root (:) Commands Summary
Command
:ACTivity (see
page 142)
n/a
:AUToscale
[<source>[,..,<source
>]] (see page 144)
:AUToscale:AMODE
<value> (see
page 146)
:AUToscale:CHANnels
<value> (see
page 147)
:BLANk [<source>]
(see page 148)
:CDISplay (see
page 149)
Agilent InfiniiVision 7000A Series Oscilloscopes Programmer's Guide
Query
:ACTivity? (see
page 142)
:AER? (see page 143)
n/a
:AUToscale:AMODE?
(see page 146)
:AUToscale:CHANnels?
(see page 147)
n/a
n/a
Commands by Subsystem
"Introduction to Root (:) Commands"
Options and Query Returns
<return value> ::=
<edges>,<levels>
<edges> ::= presence of edges
(32-bit integer in NR1 format)
<levels> ::= logical highs or
lows (32-bit integer in NR1
format)
{0 | 1}; an integer in NR1 format
<source> ::= CHANnel<n> for DSO
models
<source> ::= {CHANnel<n> |
DIGital0,..,DIGital15 | POD1 |
POD2} for MSO models
<source> can be repeated up to 5
times
<n> ::= 1-2 or 1-4 in NR1 format
<value> ::= {NORMal | CURRent}}
<value> ::= {ALL | DISPlayed}}
<source> ::= {CHANnel<n>} |
FUNCtion | MATH | SBUS} for DSO
models
<source> ::= {CHANnel<n> |
DIGital0,..,DIGital15 | POD{1 |
2} | BUS{1 | 2} | FUNCtion | MATH
| SBUS} for MSO models
<n> ::= 1-2 or 1-4 in NR1 format
n/a
5
139