Agilent Technologies InfiniiVision 7000A Series Programmer's Manual page 404

5
Commands by Subsystem
Table 73 :SAVE Commands Summary (continued)
Command
:SAVE:SETup[:STARt]
[<file_spec>] (see
page 415)
:SAVE:WAVeform[:STARt
] [<file_name>] (see
page 416)
:SAVE:WAVeform:FORMat
<format> (see
page 417)
:SAVE:WAVeform:LENGth
<length> (see
page 418)
:SAVE:WAVeform:SEGMen
ted <option> (see
page 419)
Introduction to
The :SAVE subsystem provides commands to save oscilloscope setups and
:SAVE Commands
traces, screen images, and data.
:SAV is an acceptable short form for :SAVE.
Reporting the Setup
Use :SAVE? to query setup information for the SAVE subsystem.
Return Format
The following is a sample response from the :SAVE? query. In this case,
the query was issued following the *RST command.
:SAVE:FIL "";:SAVE:IMAG:AREA GRAT;FACT 0;FORM TIFF;INKS 0;PAL
MON;:SAVE:PWD "C:/setups/";:SAVE:WAV:FORM NONE;LENG 1000;SEGM CURR
404
Query
n/a
n/a
:SAVE:WAVeform:FORMat
? (see page 417)
:SAVE:WAVeform:LENGth
? (see page 418)
:SAVE:WAVeform:SEGMen
ted? (see page 419)
Agilent InfiniiVision 7000A Series Oscilloscopes Programmer's Guide
Options and Query Returns
<file_spec> ::= {<internal_loc>
| <file_name>}
<internal_loc> ::= 0-9; an
integer in NR1 format
<file_name> ::= quoted ASCII
string
<file_name> ::= quoted ASCII
string
<format> ::= {ALB | ASCiixy | CSV
| BINary | NONE}
<length> ::= 100 to max. length;
an integer in NR1 format
<option> ::= {ALL | CURRent}