Mtest:average - Agilent Technologies InfiniiVision 7000A Series Programmer's Manual

7
Obsolete and Discontinued Commands

:MTESt:AVERage

Command Syntax
:MTESt:AVERage <on_off>
<on_off> ::= {{1 | ON} | {0 | OFF}}
The :MTESt:AVERage command enables or disables averaging. When ON,
the oscilloscope acquires multiple data values for each time bucket, and
averages them. When OFF, averaging is disabled. To set the number of
averages, use the :MTESt:AVERage:COUNt command described next.
The :MTESt:AVERage command is obsolete and is provided for backward compatibility to
N O T E
previous oscilloscopes. Use the :ACQuire:TYPE AVERage command (see
Query Syntax
:MTESt:AVERage?
The :MTESt:AVERage? query returns the current setting for averaging.
Return Format
<on_off><NL>
<on_off> ::= {1 | 0}
See Also •
•
728
(see page 786)
"Introduction to :MTESt Commands"
":MTESt:AVERage:COUNt"
Agilent InfiniiVision 7000A Series Oscilloscopes Programmer's Guide
on page 360
on page 729
page 196) instead.