External:input - Agilent Technologies InfiniiVision 7000A Series Programmer's Manual

7
Obsolete and Discontinued Commands

:EXTernal:INPut

Command Syntax
:EXTernal:INPut <impedance>
<impedance> ::= {ONEMeg | FIFTy}
The :EXTernal:IMPedance command selects the input impedance setting for
the external trigger. The legal values for this command are ONEMeg (1
Ω
M
The :EXTernal:INPut command is an obsolete command provided for compatibility to
N O T E
previous oscilloscopes. Use the :EXTernal:IMPedance command (see
Query Syntax
:EXTernal:INPut?
The :EXTernal:INPut? query returns the current input impedance setting
for the external trigger.
Return Format
<impedance value><NL>
<impedance value> ::= {ONEM | FIFT}
See Also •
•
•
702
(see page 786)
Ω
) and FIFTy (50 ).
"Introduction to :EXTernal Trigger Commands"
"Introduction to :TRIGger Commands"
":CHANnel<n>:IMPedance"
Agilent InfiniiVision 7000A Series Oscilloscopes Programmer's Guide
on page 467
on page 223
page 257) instead.
on page 254