Trigger:i2S:source:clock - Agilent Technologies InfiniiVision 7000A Series Programmer's Manual

:TRIGger:I2S:SOURce:CLOCk

Command Syntax
:TRIGger:I2S:SOURce:CLOCk <source>
<source> ::= {CHANnel<n> | EXTernal} for the DSO models
<source> ::= {CHANnel<n> | DIGital0,..,DIGital15} for the MSO models
<n> ::= {1 | 2 | 3 | 4} for the four channel oscilloscope models
<n> ::= {1 | 2} for the two channel oscilloscope models
The :TRIGger:I2S:SOURce:CLOCk controls which signal is used as the serial
clock (SCLK) source by the serial decoder and/or trigger when in I2S
mode.
Query Syntax
:TRIGger:I2S:SOURce:CLOCk?
The :TRIGger:I2S:SOURce:CLOCk? query returns the current source for the
I2S serial clock (SCLK).
Return Format
<source><NL>
See Also
•
•
•
Agilent InfiniiVision 7000A Series Oscilloscopes Programmer's Guide
(see page 786)
"Introduction to :TRIGger Commands"
":TRIGger:I2S:SOURce:DATA"
":TRIGger:I2S:SOURce:WSELect"
Commands by Subsystem
on page 467
on page 538
on page 539
5
537