Channel<N>:Probe:id - Agilent Technologies InfiniiVision 7000A Series Programmer's Manual

5
Commands by Subsystem
:CHANnel<n>:PROBe:ID
(see page 786)
Query Syntax
:CHANnel<n>:PROBe:ID?
<n> ::= {1 | 2 | 3 | 4} for the four channel oscilloscope models
<n> ::= {1 | 2} for the two channel oscilloscope models
The :CHANnel<n>:PROBe:ID? query returns the type of probe attached to
the specified oscilloscope channel.
Return Format
<probe id><NL>
<probe id> ::= unquoted ASCII string up to 11 characters
Some of the possible returned values are:
• 1131A
• 1132A
• 1134A
• 1147A
• 1153A
• 1154A
• 1156A
• 1157A
• 1158A
• 1159A
• AutoProbe
• E2621A
• E2622A
• E2695A
• E2697A
• HP1152A
• HP1153A
• NONE
• Probe
• Unknown
• Unsupported
See Also
• "Introduction to :CHANnel<n> Commands" on page 218
Agilent InfiniiVision 7000A Series Oscilloscopes Programmer's Guide 229