:SBUS:M1553:BASE
Command Syntax
:SBUS:M1553:BASE <base>
<base> ::= {BINary | HEX}
The :SBUS:M1553:BASE command determines the base to use for the
MIL- STD 1553 decode display.
This command is only valid on 4 (analog) channel oscilloscope models when the MIL-STD
N O T E
1553 serial decode option (Option 553) has been licensed.
Query Syntax
:SBUS:M1553:BASE?
The :SBUS:M1553:BASE? query returns the current MIL- STD 1553 display
decode base.
Return Format
<base><NL>
<base> ::= {BIN | HEX}
Errors
•
See Also
•
•
Agilent InfiniiVision 7000A Series Oscilloscopes Programmer's Guide
(see
page
786)
"- 241, Hardware missing"
"Introduction to :SBUS Commands"
":TRIGger:M1553 Commands"
on page 745
on page 421
on page 566
Commands by Subsystem
5
435