Trigger:glitch:source - Agilent Technologies InfiniiVision 7000A Series Programmer's Manual

:TRIGger:GLITch:SOURce

Command Syntax
:TRIGger:GLITch:SOURce <source>
<source> ::= {CHANnel<n> | EXTernal} for the DSO models
<source> ::= {DIGital0,..,DIGital15 | CHANnel<n>} for the MSO models
<n> ::= {1 | 2 | 3 | 4} for the four channel oscilloscope models
<n> ::= {1 | 2} for the two channel oscilloscope models
The :TRIGger:GLITch:SOURce command selects the channel that produces
the pulse width trigger.
Query Syntax
:TRIGger:GLITch:SOURce?
The :TRIGger:GLITch:SOURce? query returns the current pulse width
source. If all channels are off, the query returns "NONE."
Return Format
<source><NL>
See Also •
•
•
•
•
•
Example Code
•
Agilent InfiniiVision 7000A Series Oscilloscopes Programmer's Guide
(see page 786)
"Introduction to :TRIGger Commands"
":TRIGger:MODE" on page 473
":TRIGger:GLITch:LEVel"
":TRIGger:GLITch:POLarity"
":TRIGger:GLITch:QUALifier"
":TRIGger:GLITch:RANGe"
"Example Code" on page 504
on page 467
on page 521
on page 522
on page 523
on page 524
Commands by Subsystem
5
525