Trigger:i2S:alignment - Agilent Technologies InfiniiVision 7000A Series Programmer's Manual

5
Commands by Subsystem

:TRIGger:I2S:ALIGnment

Command Syntax
:TRIGger:I2S:ALIGnment <setting>
<setting> ::= {I2S | LJ | RJ}
The :TRIGger:I2S:ALIGnment command selects the data alignment of the
I2S bus for the serial decoder and/or trigger when in I2S mode:
• I2S — standard.
• LJ — left justified.
• RJ — right justified.
Note that the word select (WS) polarity is specified separately with the
:TRIGger:I2S:WSHigh command.
Query Syntax
:TRIGger:I2S:ALIGnment?
The :TRIGger:I2S:ALIGnment? query returns the currently selected I2S data
alignment.
Return Format
<setting><NL>
<setting> ::= {I2S | LJ | RJ}
See Also •
•
•
•
•
528
(see page 786)
"Introduction to :TRIGger Commands"
":TRIGger:I2S:CLOCk:SLOPe"
":TRIGger:I2S:RWIDth"
":TRIGger:I2S:TWIDth"
":TRIGger:I2S:WSLow"
Agilent InfiniiVision 7000A Series Oscilloscopes Programmer's Guide
on page 467
on page 530
on page 536
on page 542
on page 543