Trigger:usb Commands - Agilent Technologies InfiniiVision 7000A Series Programmer's Manual

:TRIGger:USB Commands

Table 93 :TRIGger:USB Commands Summary
Command
:TRIGger:USB:SOURce:D
MINus <source> (see
page 612)
:TRIGger:USB:SOURce:D
PLus <source> (see
page 613)
:TRIGger:USB:SPEed
<value> (see
page 614)
:TRIGger:USB:TRIGger
<value> (see
page 615)
Agilent InfiniiVision 7000A Series Oscilloscopes Programmer's Guide
Query
:TRIGger:USB:SOURce:D
MINus? (see page 612)
:TRIGger:USB:SOURce:D
PLus? (see page 613)
:TRIGger:USB:SPEed?
(see page 614)
:TRIGger:USB:TRIGger?
(see page 615)
Commands by Subsystem
Options and Query Returns
<source> ::= {CHANnel<n> |
EXTernal} for the DSO models
<source> ::= {CHANnel<n> |
DIGital0,..,DIGital15} for the
MSO models
<n> ::= 1-2 or 1-4 in NR1 format
<source> ::= {CHANnel<n> |
EXTernal} for the DSO models
<source> ::= {CHANnel<n> |
DIGital0,..,DIGital15} for the
MSO models
<n> ::= 1-2 or 1-4 in NR1 format
<value> ::= {LOW | FULL}
<value> ::= {SOP | EOP |
ENTersuspend | EXITsuspend |
RESet}
5
611