Mtest:scale:xdelta - Agilent Technologies InfiniiVision 7000A Series Programmer's Manual

:MTESt:SCALe:XDELta

Command Syntax
:MTESt:SCALe:XDELta <xdelta_value>
<xdelta_value> ::= X delta value in NR3 format
The :MTESt:SCALe:XDELta command defines the position of the X2
marker with respect to the X1 marker. In the mask test coordinate system,
the X1 marker defines where X=0; thus, the X2 marker defines where X=1.
Because all X vertices of the regions defined for mask testing are
normalized with respect to X1 and
vertices to stay in the same locations with respect to X1 and
many applications, it is best if you define XDELta as a pulse width or bit
period. Then, a change in data rate without corresponding changes in the
waveform can easily be handled by changing
The X- coordinate of polygon vertices is normalized using this equation:
X = (X *
The X delta value is a time value specifying the distance of the X2 marker
with respect to the X1 marker.
For example, if the period of the waveform you wish to test is 1 ms,
setting
and X2 markers.
Query Syntax
:MTESt:SCALe:XDELta?
The :MTESt:SCALe:XDELta? query returns the current value of
Return Format
<xdelta_value><NL>
<xdelta_value> ::= X delta value in NR3 format
See Also
•
•
•
•
•
Agilent InfiniiVision 7000A Series Oscilloscopes Programmer's Guide
(see page 786)
Δ
X) + X1
Δ
X to 1 ms ensures that the waveform's period is between the X1
"Introduction to :MTESt Commands"
":MTESt:SCALe:BIND"
":MTESt:SCALe:X1" on page 386
":MTESt:SCALe:Y1" on page 388
":MTESt:SCALe:Y2" on page 389
Δ
X, redefining
on page 360
on page 385
Commands by Subsystem
Δ
X also moves those
Δ
X. Thus, in
Δ
X.
Δ
X.
5
387