Display:label - Agilent Technologies InfiniiVision 7000A Series Programmer's Manual

:DISPlay:LABel

Command Syntax
:DISPlay:LABel <value>
<value> ::= {{1 | ON} | {0 | OFF}}
The :DISPlay:LABel command turns the analog and digital channel labels
on and off.
Query Syntax
:DISPlay:LABel?
The :DISPlay:LABel? query returns the display mode of the analog and
digital labels.
Return Format
<value><NL>
<value> ::= {0 | 1}
See Also
•
•
Example Code
Example program from the start:
page 812
Agilent InfiniiVision 7000A Series Oscilloscopes Programmer's Guide
(see page 786)
"Introduction to :DISPlay Commands"
":CHANnel<n>:LABel"
' DISP_LABEL (not executed in this example)
' - Turns label names ON or OFF on the analyzer display.
myScope.WriteString ":DISPLAY:LABEL ON"
on page 244
on page 225
"VISA COM Example in Visual Basic"
Commands by Subsystem
' Turn on labels.
5
on
249