To Perform A Transform Function On An Arithmetic Operation - Agilent Technologies InfiniiVision 2000 X-Series User Manual

4
Math Waveforms
2 If f(t) is not already shown on the Function softkey, press the Function
3 Use the Operator softkey to select an operator or transform.
4 Use the Source 1 softkey to select the analog channel on which to
5 If you select an arithmetic operator, use the Source 2 softkey to select
6 To re- size and re- position the math waveform, see
Math Operating Hints
T I P
If the analog channel or math function is clipped (not fully displayed on screen) the
resulting displayed math function will also be clipped.
Once the function is displayed, the analog channel(s) may be turned off for better viewing
of the math waveform.
The vertical scaling and offset of each math function can be adjusted for ease of viewing
and measurement considerations.
The math function waveform can be measured using [Cursors] and/or [Meas].

To perform a transform function on an arithmetic operation

To perform a transform function (FFT) on an arithmetic operation (add,
subtract, or multiply):
1 Press the Function softkey and select g(t): Internal.
2 Use the Operator, Source 1, and Source 2 softkeys to set up an arithmetic
3 Press the Function softkey and select f(t): Displayed.
4 Use the Operator softkey to select a transform function (FFT).
64
sofkey and select f(t): Displayed.
For more information on the operators or transforms, see:
• "Math Operators"
• "Math Transforms"
perform math. You can rotate the Entry knob or repetitively press the
Source 1 softkey to make your selection. If you choose a transform
function (FFT) the result is displayed.
the second source for the arithmetic operation. The result is displayed.
waveform scale and offset"
operation.
on page 66
on page 68
on page 65.
Agilent InfiniiVision 2000 X-Series Oscilloscopes User's Guide
"To adjust the math