Hardcopy:pdriver - Agilent Technologies InfiniiVision 7000A Series Programmer's Manual

7
Obsolete and Discontinued Commands

:HARDcopy:PDRiver

Command Syntax
:HARDcopy:PDRiver <driver>
<driver> ::= {AP2Xxx | AP21xx | {AP2560 | AP25} | {DJ350 | DJ35} |
The HARDcopy:PDRiver command sets the hardcopy printer driver used
for the selected printer.
If the correct driver for the selected printer can be identified, it will be
selected and cannot be changed.
The :HARDcopy:PDRiver command is an obsolete command provided for compatibility to
N O T E
previous oscilloscopes. Use the :HARDcopy:APRinter (see
Query Syntax
:HARDcopy:PDRiver?
The :HARDcopy:PDRiver? query returns the selected hardcopy printer
driver.
Return Format
<driver><NL>
<driver> ::= {AP2X | AP21 | AP25 | DJ35 | DJ6 | DJ63 | DJ6S | DJ6P |
See Also •
•
712
(see page 786)
DJ6xx | {DJ630 | DJ63} | DJ6Special | DJ6Photo |
DJ8Special | DJ8xx | DJ9Vip | OJPRokx50 | DJ9xx | GVIP |
DJ55xx | {PS470 | PS47} {PS100 | PS10} | CLASer |
MLASer | LJFastraster | POSTscript}
DJ8S | DJ8 | DJ9V | OJPR | DJ9 | GVIP | DJ55 | PS10 |
PS47 | CLAS | MLAS | LJF | POST}
"Introduction to :HARDcopy Commands"
":HARDcopy:FORMat"
Agilent InfiniiVision 7000A Series Oscilloscopes Programmer's Guide
on page 282
on page 709
page 284) command instead.