Agilent Technologies InfiniiVision 7000A Series Programmer's Manual page 28

1
What's New
Changed
Commands
Command
:BUS<n>:LABel (see
:CHANnel<n>:LABel (see
:DIGital<n>:LABel (see
:DISPlay:LABList (see
:MARKer:MODE (see
:RECall:PWD (see
:SAVE:IMAGe[:STARt] (see
:SAVE:PWD (see
:SAVE:WAVeform[:STARt] (see
:TRIGger:CAN:SIGNal:BAUDrate (see
page
:TRIGger:LIN:SIGNal:BAUDrate (see
:TRIGger:UART:BAUDrate (see
:TRIGger:UART:DATA (see
Obsolete
Commands
Obsolete Command
:MTESt:AMASk:{SAVE |
STORe} (see
:MTESt:AVERage (see
page
:MTESt:AVERage:COUNt (see
page
:MTESt:LOAD (see
:MTESt:RUMode (see
page
28
page 205)
page 225)
page 240)
page 250)
page 297)
page 401)
page
page 414)
page
485)
page
page 602)
page 727)
728)
729)
page 730)
731)
Agilent InfiniiVision 7000A Series Oscilloscopes Programmer's Guide
Differences
Labels can now be up to 10 characters.
Labels can now be up to 10 characters.
Labels can now be up to 10 characters.
Labels can now be up to 10 characters.
You can now select the WAVeform tracking
cursors mode.
You can set the present working directory in
addition to querying for this information.
406) The file extension specified will change the
:SAVE:IMAGe:FORMat setting if it is a valid
image file extension.
You can set the present working directory in
addition to querying for this information.
406) The file extension specified will change the
:SAVE:WAVeform:FORMat setting if it is a valid
waveform file extension.
The baud rate value can now be set in 100 b/s
increments.
page 561) The baud rate value can now be set in 100 b/s
increments.
599) The baud rate value can now be set in 100 b/s
increments and the maximum baud rate is now
3 Mb/s.
You can now specify the data value using a
quoted ASCII character.
Current Command Equivalent
:SAVE:MASK[:STARt] (see
page 413)
:ACQuire:TYPE AVERage (see
page 196)
:ACQuire:COUNt (see
page 185)
:RECall:MASK[:STARt] (see
page 400)
:MTESt:RMODe (see
page 377)
Behavior Differences