Trigger:lin:standard - Agilent Technologies InfiniiVision 7000A Series Programmer's Manual

:TRIGger:LIN:STANdard

Command Syntax
:TRIGger:LIN:STANdard <std>
<std> ::= {LIN13 | LIN20}
The :TRIGger:LIN:STANdard command sets the LIN standard in effect for
triggering and decoding to be LIN1.3 or LIN2.0.
Query Syntax
:TRIGger:LIN:STANdard?
The :TRIGger:LIN:STANdard? query returns the current LIN standard
setting.
Return Format
<std><NL>
<std> ::= {LIN13 | LIN20}
See Also
•
•
•
•
Agilent InfiniiVision 7000A Series Oscilloscopes Programmer's Guide
(see page 786)
"Introduction to :TRIGger Commands"
":TRIGger:MODE" on page 473
":TRIGger:LIN:SIGNal:DEFinition"
":TRIGger:LIN:SOURce"
on page 467
on page 740
on page 562
Commands by Subsystem
5
563