Trigger:duration:greaterthan - Agilent Technologies InfiniiVision 7000A Series Programmer's Manual

5
Commands by Subsystem

:TRIGger:DURation:GREaterthan

Command Syntax
:TRIGger:DURation:GREaterthan <greater_than_time>[<suffix>]
<greater_than_time> ::= minimum trigger duration in seconds
<suffix> ::= {s | ms | us | ns | ps }
The :TRIGger:DURation:GREaterthan command sets the minimum duration
for the defined pattern when :TRIGger:DURation:QUALifier is set to
GREaterthan. The command also sets the timeout value when the
:TRIGger:DURation:QUALifier is set to TIMeout.
Query Syntax
:TRIGger:DURation:GREaterthan?
The :TRIGger:DURation:GREaterthan? query returns the minimum duration
time for the defined pattern.
Return Format
<greater_than_time><NL>
See Also
•
•
•
•
490
(see page 786)
"Introduction to :TRIGger Commands"
":TRIGger:DURation:PATTern"
":TRIGger:DURation:QUALifier"
":TRIGger:MODE" on page 473
Agilent InfiniiVision 7000A Series Oscilloscopes Programmer's Guide
in NR3 format
on page 467
on page 492
on page 493