Mtest:rmode:faction:print - Agilent Technologies InfiniiVision 7000A Series Programmer's Manual

:MTESt:RMODe:FACTion:PRINt

Command Syntax
:MTESt:RMODe:FACTion:PRINt <on_off>
<on_off> ::= {{1 | ON} | {0 | OFF}}
The :MTESt:RMODe:FACTion:PRINt command sets printing on mask failures
on or off.
Setting :MTESt:RMODe:FACTion:PRINt ON automatically sets
N O T E
:MTESt:RMODe:FACTion:SAVE OFF.
See
the hardcopy device and formatting options.
Query Syntax
:MTESt:RMODe:FACTion:PRINt?
The :MTESt:RMODe:FACTion:PRINt? query returns the current mask failure
print setting.
Return Format
<on_off><NL>
<on_off> ::= {1 | 0}
See Also
•
•
•
•
Agilent InfiniiVision 7000A Series Oscilloscopes Programmer's Guide
(see page 786)
":HARDcopy Commands"
"Introduction to :MTESt Commands"
":MTESt:RMODe:FACTion:MEASure"
":MTESt:RMODe:FACTion:SAVE"
":MTESt:RMODe:FACTion:STOP"
on page 281 for more information on setting
on page 360
on page 378
on page 380
on page 381
Commands by Subsystem
5
379