Table of Contents
Advertisement
7
Obsolete and Discontinued Commands
:HARDcopy:FORMat
(see
page
786)
Command Syntax
:HARDcopy:FORMat <format>
<format> ::= {BMP[24bit] | BMP8bit | PNG | CSV | ASCiixy | BINary
| PRINter0 | PRINter1}
The HARDcopy:FORMat command sets the hardcopy format type.
PRINter0 and PRINter1 are only valid when printers are connected to the
oscilloscope's USB ports. (The first printer connected/identified is
PRINter0 and the second is PRINter1.)
The :HARDcopy:FORMat command is an obsolete command provided for compatibility to
N O T E
previous oscilloscopes. Use the :SAVE:IMAGe:FORMat (see
page
409),
:SAVE:WAVeform:FORMat (see
page
417), and :HARDcopy:APRinter (see
page
284)
commands instead.
Query Syntax
:HARDcopy:FORMat?
The :HARDcopy:FORMat? query returns the selected hardcopy format type.
Return Format
<format><NL>
<format> ::= {BMP | BMP8 | PNG | CSV | ASC | BIN | PRIN0 | PRIN1}
See Also
•
"Introduction to :HARDcopy Commands"
on page 282
Agilent InfiniiVision 7000A Series Oscilloscopes Programmer's Guide
709
Hide quick links:
Advertisement
Table of Contents
