5
Commands by Subsystem
:MTESt:COUNt:FWAVeforms
Query Syntax
:MTESt:COUNt:FWAVeforms? [CHANnel<n>]
<n> ::= {1 | 2 | 3 | 4} for the four channel oscilloscope models
<n> ::= {1 | 2} for the two channel oscilloscope models
The :MTESt:COUNt:FWAVeforms? query returns the total number of failed
waveforms in the current mask test run. This count is for all regions and
all waveforms.
Return Format
<failed><NL>
<failed> ::= number of failed waveforms in NR1 format.
See Also
•
•
•
•
•
Example Code
•
368
(see
page
786)
"Introduction to :MTESt Commands"
":MTESt:COUNt:WAVeforms"
":MTESt:COUNt:TIME"
":MTESt:COUNt:RESet"
":MTESt:SOURce"
on page 390
"Example Code"
on page 360
Agilent InfiniiVision 7000A Series Oscilloscopes Programmer's Guide
on page 360
on page 371
on page 370
on page 369